wic.support
Moderators-
Content Count
448 -
Joined
-
Last visited
-
Days Won
28
Everything posted by wic.support
-
Good day. Printer will turn off itself automaticaly in the normal mode, when updating in the service mode you need to turn it off manually then turn it on again. Use right NW07K7 version!! https://chiplesssolutions.com/download/chipless/XP15000_FWG150TL_NW07K7_NW99Z9.zip
- 6 replies
-
- chipless firmware xp-15000
- firmware xp-15000
- (and 2 more)
-
Good day. You can pay now difference in Firmware and Activation Key cost only - $35 - $20 = $15 Link for payment - https://store.payproglobal.com/checkout?products[1][id]=47580 Also, please, note that firmware version has been updated for this specific model recently, you need to select new version of the firmware on this page: https://www.2manuals.com/product_info.php?manufacturers_id=&products_id=1837
-
WF-3640 WIC Firmware Downgrade Not Working
wic.support replied to EcoDuck's topic in ROM is not writable
Good day. Unfortunately, Epson started to block specific old versions of the firmware on the new devices, firmware from the WIC could not be flushed on your printer, you need to use chipless version from the Chipless Solutions. If printer is already erased previous firmware before checking and blocking new one, you can restore functionality using free recovery firmware that you can enable via settings. -
WF3720 - Wrong ID Readed from the printer
wic.support replied to Humberto's topic in Wrong ID Readed
Please, try to use new version of the license application from the link below: http://www.chiplesssolutions.com/download/updates/license.zip Password is "3720".- 37 replies
-
- wf-3720
- fwf469tl.efu
-
(and 4 more)
Tagged with:
-
Good day. Unfortunately WIC version of the firmware has been blocked by epson on loader level and could not be used with this specific device, you need to enable recovery firmwares in the settings and then update printer with recovery firmware to restore functionality. Then you need to use firmware from Chipless Solutions.
-
WF3720 - Wrong ID Readed from the printer
wic.support replied to Humberto's topic in Wrong ID Readed
We will investigate this problem, I will write back when the solution will be available.- 37 replies
-
- wf-3720
- fwf469tl.efu
-
(and 4 more)
Tagged with:
-
WF3720 - Wrong ID Readed from the printer
wic.support replied to Humberto's topic in Wrong ID Readed
Good day. I think it will be faster if you contact me directly via messenger, I will send my contacts in PM.- 37 replies
-
- wf-3720
- fwf469tl.efu
-
(and 4 more)
Tagged with:
-
WF3720 - Wrong ID Readed from the printer
wic.support replied to Humberto's topic in Wrong ID Readed
Good day. As you can see on the screen, firmware that has been used for update is CL27J9, but firmware for the link I provided is CL21I2, somehow wrong version has been used. Please, delete all existing firmware archives from the PC first, then download firmware directly from my link, make sure that archive name contains CL21I2, then unpack it and execute.- 37 replies
-
- wf-3720
- fwf469tl.efu
-
(and 4 more)
Tagged with:
-
WF3720 - Wrong ID Readed from the printer
wic.support replied to Humberto's topic in Wrong ID Readed
Good day. What is current printer version? At what point did you receive this message? Also, please, download firmware again from the site: https://chiplesssolutions.com/download/chipless/WF3720_FWF469TL_CL30J5_CL99Z9.zip flush it and try to activate second time.- 37 replies
-
- wf-3720
- fwf469tl.efu
-
(and 4 more)
Tagged with:
-
Epson WorkForce Pro WF-C8690DWF
wic.support replied to sid2302's topic in Chipless Firmware by License.exe utility
OK, we are working on solution, I will write to you when new information will be available. -
Epson WorkForce Pro WF-C8690DWF
wic.support replied to sid2302's topic in Chipless Firmware by License.exe utility
Good day. What is exact printer model and current firmware version (you can check both in the WICReset using report button)? -
License.exe shows Communication Failed - error code 10060
wic.support replied to AleSajas's topic in 10060 error
Good day. It is working at the present moment. -
WF-2750 Cannot See the Printer
wic.support replied to EcoDuck's topic in Chipless Firmware by License.exe utility
BradC, each time when you connect usb printer to the PC virtual printing USB port name (USB001,USB002,etc) is assigned, once you install the driver this assignment is remembered and as result the more installed printers you have in the system the higher is port number for the next one. Unfortunately, license.exe can only work with first 64 ports, so in order to use it with the new device, you need to delete one of the existed printers with low port number, freeing it, and then replug the new one (of course it will only work if new device is not installed itself, otherwise it will have fixed port number and nothing will change). Bottom line, remove as much unused printers from the system as possible.- 8 replies
-
- wf-2750 printer
- resolved
-
(and 1 more)
Tagged with:
-
Due to the technical differences between Canon and Epson printers it`s all or nothing deal, we do not provide trial option for this brand, it`s not a sales policy, I`m afraid you either need to use full key or purchase service tool that you can find from the main page.
-
Good day. Unfortunately, trial reset is not supported for Canon.
-
Please, install laster version of the application (5.55) from this site and try again.
-
WF-2750 Cannot See the Printer
wic.support replied to EcoDuck's topic in Chipless Firmware by License.exe utility
Good day. 1. Try different USB ports. 2. Install WIC reset and check if printer is recognized by it. 3. Make sure that virtual USB port assigned to the printer is below 64, this one is only relevant if you have a lot of printers installed in the system. You can see USB port on the 'ports' tab of the printer`s settings or on the device tooltip in WIC. 4. If you are using WIN10 try to start license.exe with administrator rights.- 8 replies
-
- wf-2750 printer
- resolved
-
(and 1 more)
Tagged with:
-
Good day. This model should be supported, please, show me screenshot from the WIC when printer is connected.
-
Is it possible to change printer zone (WF-C5290)?
wic.support replied to EmilioEcheverria's topic in Inkjet Printers Issues
Good day, as far as I know you need to change decoder inside printhead. If you want software solution you need to use chipless firmware. -
Yes, you can and you will not need any chips after activation.
- 116 replies
-
- no ink firmware
- wf-m5799
- (and 7 more)
-
Good day. Please, check private messages. Also Please, install latest official version of the firmware, then replace/reset maintenance box and make sure that it is recognized by the printer, after this install chipless firmware (firmware with disabled ink cartridges) back. You have to use new Firmware Key.
-
We will need to test it further, I will write back as soon as I will have new information. Just to be clear, does reinstalling official firmware and replacing maintenance box then using chipless firmware again temporary helps until new maintenance box is full again or does the printer immediately stops recognizing new maintenance box once chipless firmware is installed again?
-
P600 Not Recognising ink cartridge.
wic.support replied to bsnmcahi's topic in Chipless Firmware by License.exe utility
Good day. It may be possible that printer updated firmware again automatically if it was connected to the network, please, check private messages. -
P600 Not Recognising ink cartridge.
wic.support replied to bsnmcahi's topic in Chipless Firmware by License.exe utility
Open and close ink cartridges case