wear 0 Report post Posted May 14, 2019 Can chipless solution for XP-15000, XP-15010 also reset the waste ink cartridge? Thanks! Share this post Link to post Share on other sites
John_Admin 388 Report post Posted May 15, 2019 You have to run License.exe utility and enter Activation Key Read manual here - http://www.2manuals.com/product_info.php?cPath=107&products_id=1850 Share this post Link to post Share on other sites
kedaiprint 0 Report post Posted May 15, 2019 Iam use license.exe, but key is different with the key for wicreset. I give you my key, please read my message. Share this post Link to post Share on other sites
Mizar5 0 Report post Posted May 23, 2019 I have tried many times now to start up my epson wf 4730 in update mode according to your instructions, no luck. how accurate is the photograph showing where to press on the printer touchscreen. and should i release the buttons as soon as the blue light comes on, or hold it for a count of three? thanks. Share this post Link to post Share on other sites
John_Admin 388 Report post Posted May 24, 2019 Press right upper location of touch screen - then POWER Hold until Blue Power button will turn ON - then release all buttons If You hold more time - you will get Red text Share this post Link to post Share on other sites
Mizar5 0 Report post Posted May 24, 2019 (edited) so i took a chance and updated the 'usb'. that worked, the printer was updated. all went well, bought the key and am ready to do that. But i cannot find the file 'license.exe'. where is it supposed to be? update: I found your link for license,exe in a forum. but when i downloaded and ran it, the printer selection was empty. the version was from July 2018. i'm guessing there is a newer one that recognizes the WF 4730? thanks. Edited May 25, 2019 by Mizar5 update Share this post Link to post Share on other sites
John_Admin 388 Report post Posted May 25, 2019 https://chiplesssolutions.com/download.shtml Share this post Link to post Share on other sites
Mizar5 0 Report post Posted May 26, 2019 Got it! all worked, thanks a ton John. Share this post Link to post Share on other sites
Mizar5 0 Report post Posted June 18, 2019 John, hello. back on May 25th when I said 'it all works' I meant that the firmware update was successful, and the printer display panel showed all of the cartridges as completely full. Well I just tried for the first time a couple of days ago to print and it did not work. I thought it might be the cartridges, so I put in a set of cartridges from my other 4730 (cartridges that worked fine in the other printer). The upgraded printer still did not print. I ran the nozzle check and the print head cleaning functions, still it does not print. Only the very slightest of ink shows on the paper. When I print the same file to the other printer, using the same cartridges, the other printer works fine. Any idea on this? Thanks Share this post Link to post Share on other sites
John_Admin 388 Report post Posted June 21, 2019 Clean printhead and use high quality inks Share this post Link to post Share on other sites
Mizar5 0 Report post Posted July 8, 2019 John, Hello again. I have been using oem cartridges. Also, i have been trying the print head cleaning the printer performs itself, and then also tried a manual cleaning. Nothing is working, just getting very minute amounts of print showing, if hardly anything at all. Since it wont' print, I'll only be able to use the printer for scanning. However, I have another identical 4730, and was hoping i could transfer your firmware to that printer. Can that be done? Thanks. Share this post Link to post Share on other sites
surfer4u 0 Report post Posted October 4, 2019 I am also interested in the chipless epson for XP435 If you have it, please tell me ? Share this post Link to post Share on other sites
Alihadi 0 Report post Posted October 14, 2019 I didn’t recieve my activation code my invoice is 17975655 Share this post Link to post Share on other sites
John_Admin 388 Report post Posted October 16, 2019 We have sent now in PM - check Share this post Link to post Share on other sites
Gaspa79 0 Report post Posted January 9, 2020 Hey there! I got a recovery key, but it says "activation code and printer's ID do not match". If I try to activate again I get a communication failed error (-10093). I purchased this as gaspacho79@gmail.com, my recovery key is C9JTT-YVKJ4-XXXXX-XXXXX-XXXXX Share this post Link to post Share on other sites
John_Admin 388 Report post Posted January 9, 2020 we have sent you another key try it Share this post Link to post Share on other sites
davedriscoll 0 Report post Posted January 10, 2020 Hi John, Epson XP440 user In July i bought chipless for 2 printers Activation Key: 06-15 C8G67-XXXXX-M4RVR-HDBD3-TFXFH 07-05 D6MFT-XXXXX-4DGTD-X3VJQ-J6FPK I have had significant challenge getting my continuousious system working and destroyed 3 printers in the process. Under warranty, I got a new printer. Now I am able to reinstall the firmware but unable to recover aor activate on epsons replacement. Please help me to activate? I bought 2 licenses and not using either at this moment Share this post Link to post Share on other sites
John_Admin 388 Report post Posted January 10, 2020 Activation Keys have 1-2 months expiration date After that - keys are removed from database Share this post Link to post Share on other sites
rasiel21 0 Report post Posted January 29, 2020 Hi there, I have 4 epson artisan 1430. Do you plan to support a chipless solution for the 1430? Thanks Share this post Link to post Share on other sites
John_Admin 388 Report post Posted January 29, 2020 No Share this post Link to post Share on other sites
brzezno 0 Report post Posted January 31, 2020 I must say I'm really disapointed. It did not worked for Epson p600. I bought Firmware key and updated printer as described. Printer reported update successful, but nothing has changed, INK levels are as they were before... I would love to get my money back... Share this post Link to post Share on other sites
wic.support 30 Report post Posted February 1, 2020 Please, check current firmware version using `report` button in WIC, for chipless firmware it must be AT12GC. Share this post Link to post Share on other sites
wic.support 30 Report post Posted February 2, 2020 Update process consists of two steps, first application send firmware data to the printer and signal that transfer is finished, then printer shutdown all communication and start internal update, at this point it`s impossile to check the results. Recently Epson started to block older versions of the firmware with their updates, after checking firmware signature printer just refuses to write data to the chip. If you send me key via PM, I will restore it. After this, you have two options, either use WIC key again with this method that may or may not work: or replace WIC key with CS key after paying the difference. 1 Share this post Link to post Share on other sites
John_Admin 388 Report post Posted February 3, 2020 Have You solved the problem??? Share this post Link to post Share on other sites