Jump to content
WIC Reset Program and Chipless Firmware
Sign in to follow this  
John_Admin

How to put printers in Firmware Mode

Recommended Posts

Epson Sure Color SC-P400, SC-P405, SC-P407, SC-P408, PX7V  

Press and hold:
SC-P400, SC-P405, SC-P407, SC-P408, PX7V chipless firmware

ROLL + INK + PAPER/CANCEL + POWER – wait 3-5 sec until Ink, Paper and Power LEDs are ON – then Release all buttons - printer is in the firmware update mode now.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

When firmware update is completed Power LED will start to blink.
Press POWER button – printer will turn OFF.

Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

Share this post


Link to post
Share on other sites

Epson XP-211, XP-212, XP-213, XP-214, XP-216, PX-046A
XP-230, XP-231, PX-048A  

Press and hold:
XP-211, XP-212, XP-213, XP-214, XP-216, PX-046A chipless firmware

STOP + COLOR + WIFi + POWER – wait until all LEDs except Power LED is ON - then Release all buttons. 
That means printer is in Firmware Update mode.
If indication differs - that is wrong mode. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

After Firmware Update is finished - all LEDs will blink simultaneously – printer will go OFF.
Press STOP button - printer will  turn OFF.

Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

Share this post


Link to post
Share on other sites

Epson
XP-240, XP-241, PX-049A  
XP-243, XP-245, XP-247
XP-255, XP-257
XP-2100, XP-2101, XP-2105, EW-052A

 

Press and hold:
xXP-240, XP-241, PX-049A chipless firmware

STOP + COLOR + WIFi + POWER – wait until all LEDs except Power LED is ON - then Release all buttons. 
That means printer is in Firmware Update mode.
If indication differs - that is wrong mode. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

After Firmware Update is finished - all LEDs will blink simultaneously – printer will go OFF.
Press STOP button - printer will  turn OFF.

Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

Share this post


Link to post
Share on other sites

Epson
XP-340, XP-341
XP-342 XP-343 XP-345
XP-352, XP-355
XP-430, XP-431, XP-434
XP-440, XP-441
XP-3100, XP-3105, EW-452A
XP-4100 XP-4101 XP-4105
WF-7210, WF-7211 WF-7215, PX-S5080


 

Press and hold:
XP-340, XP-341 chipless firmware

STOP + LEFT ARROW + DOWN ARROW + POWER – wait until all LEDs except Power LED is ON - then Release all buttons. 
That means printer is in Firmware Update mode.
If indication differs - that is wrong mode. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

After Firmware Update is finished - all LEDs will blink simultaneously – printer will go OFF.
Press STOP button - printer will  turn OFF.

Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

Share this post


Link to post
Share on other sites

Epson
WF-7710, WF-7711, WF-7715, WF-7720, WF-7721, PX-M5080F, PX-M5081F


 

Power OFF the printer and in 20 seconds  press and hold such buttons::
wf-7710 chipless firmware

4 + 7 + JOB/STATUS + POWER – wait 3-5 sec until on printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If text is in red color - that is wrong mode. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

When Firmware Update is complete confirm that new Firmware Version is displayed on the LCD.
Press on the 0 – printer will turn OFF.

Step 5. Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

Share this post


Link to post
Share on other sites

Epson
WF-2860, WF-2861, WF-2865
WF-3720, WF-3721, WF-3723, WF-3725, WF-3730, WF-3733, PX-M680F 

Press and hold:
WF-3720, WF-3721, WF-3723, WF-3725, WF-3730, WF-3733, PX-M680F chipless firmware


RIGHT UPPER DISPLAY CORNER + POWER – wait 20 sec or until power LED is ON then release all buttons. You will see text on the printer's LCD monitor in WHITE color - Firmware Update Mode.
If text is in red color - that is wrong mode. Try one more time.

If this way doesn"t work - You have to use other.
Please go here to see other ways to put printer in Program Update Mode - How to put WF3720 in Program Update Mode

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 
When Firmware Update is complete confirm that new Firmware Version is displayed on the LCD.
Press on the CENTER of TOUCH SCREEN – printer will turn OFF.
Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

Share this post


Link to post
Share on other sites

Epson WF-4720, WF-4730, WF-4733, WF-4734, PX-M780F  

Press and hold:
 WF-4720, WF-4730, WF-4733, WF-4734, PX-M780F chipless firmware


RIGHT UPPER DISPLAY CORNER + POWER – wait about 3 sec until Blue Power Led is ON - then release all buttons. On printer monitor you wil see WHITE text - Firmware Update Mode. If text is in red color - that is wrong mode. It means You hold too long. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 
When Firmware Update is complete confirm that new Firmware Version is displayed on the LCD.
Press on the CENTER of TOUCH SCREEN – printer will turn OFF.
Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

Share this post


Link to post
Share on other sites

Epson
WF-2630, WF-2631
WF-2650, WF-2651
WF-2750, WF-2752
WF-2760, W-2761
WF-4630


Power OFF the printer and in 20 seconds  press and hold such buttons::
WF-4630 chipless firmware

STOP + 1 + HOME + POWER – wait until on printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If text is in red color - that is wrong mode. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

When Firmware Update is Finished - confirm that new Firmware Version is displayed on the LCD.
Press on the 0 – printer will turn OFF.

Step 5. Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

Share this post


Link to post
Share on other sites

Epson
SC-P600, SC-P607, SC-P608, PX5V2
SC-P800, SC-P807, PX3V



Power OFF the printer and in 20 seconds  press and hold such buttons::
WF-4630 chipless firmware

BACK + HOME + POWER – wait until on printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If text is in red color - that is wrong mode. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

When Firmware Update is Finished - confirm that new Firmware Version is displayed on the LCD.
Press POWER button - printer will turn OFF.

Step 5. Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

Share this post


Link to post
Share on other sites

Epson
WF-C5210, PX-S884
WF-C5290



Power OFF the printer and in 20 seconds  press and hold such buttons::
WF-5210 chipless firmware

STOP + DOWN + LEFT + POWER – wait about 3 sec until on printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If text is in red color - that is wrong mode. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

When Firmware Update is Finished - confirm that new Firmware Version is displayed on the LCD.
Press OK button - printer will turn OFF.

Step 5. Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

Share this post


Link to post
Share on other sites

Epson
WF-C5710, PX-M884F
WF-C5790



Power OFF the printer and in 20 seconds  press and hold such buttons::
WF-5210 chipless firmware

4 + 7 + JOB/STATUS + POWER – wait about 3 sec until on printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If text is in red color - that is wrong mode. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

When Firmware Update is Finished - confirm that new Firmware Version is displayed on the LCD.
Press CENTER of TOUCH SCREEN  - printer will turn OFF.

Step 5. Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...