Jump to content
WIC Reset Program and Chipless Firmware


  • Content Count

  • Joined

  • Last visited

Posts posted by ReadFram


    Hi John_Admin I can do like this of your guide, Will the machine pick up the cartridges?


    Some times this can happen. Here is step by step solution:

    Step 1. Make firmware downgrade by WIC Utility to FA27HC version. You will be required Firmware Key to make this procedure.

    Step 2. Check current firmware version - it has to be FA27HC.

    Step 3. Install new Maintenance Cartridge or reset by Chip Resetter chip on maintenance cartridge. Check if printer can recognize it now.

    Step 3. Download and extract latest Chipless Firmware Version - FA99Z9 - http://chiplesssolutions.com/download/WF7710_FWG535TL_FA99Z9.zip

    Step 4. Upload firmware to  printer in normal mode  - dont put printer in Program Update mode.
    The uploading process will stuck at 70-80% -  it is ok!
    Printer will blink for about 5-15 minutes accepting new firmware - then will power OFF.

    Step 5. Open task manager and stop updater process.

    Now power on the printer - chipless firmware is installed now in your printer and maintenance cartridge is recognized by printer!

    If You have problems - give us screenshots of what You cant do and what Step you cant perform. ''

  2. Good day.
    Did you reupload chipless firmware back to the printer again after update from epson?
    What is the current version? You can check it in the printer settings or via WIC using `report` button.

    Yes, my side has downloaded the latest firmware to run already https://chiplesssolutions.com/download.shtml but when entering the acti enter the error code ak, I don't know if my side has encountered this case, there is no way to fix it. thanks .



  3. yes dear it worked previously, but suddenly i've updated to epson's new update.

    Now I run the Activation Key again, saying that I have even used a new key but failed, thanks to the admin's help.


  • Create New...