ReadFram

Hi Admin. I have printer C5210 manually Update driver. Currently the machine does not accept USB anymore. I went to the server model and received it. Do not know what the error is, ask for help. Thank you very much.

Good day. I have done it, I sincerely thank you.

Currently my machine is using Firmware Version - FA24I5. But still do not receive this cartridge sir. Thanks for your help to fix the error, I thank you very much.

Hi John_Admin I can do like this of your guide, Will the machine pick up the cartridges? '' Some times this can happen. Here is step by step solution: Step 1. Make firmware downgrade by WIC Utility to FA27HC version. You will be required Firmware Key to make this procedure. Step 2. Check current firmware version - it has to be FA27HC. Step 3. Install new Maintenance Cartridge or reset by Chip Resetter chip on maintenance cartridge. Check if printer can recognize it now. Step 3. Download and extract latest Chipless Firmware Version - FA99Z9 - http://chiplesssolutions.com/download/WF7710_FWG535TL_FA99Z9.zip Step 4. Upload firmware to printer in normal mode - dont put printer in Program Update mode. The uploading process will stuck at 70-80% - it is ok! Printer will blink for about 5-15 minutes accepting new firmware - then will power OFF. Step 5. Open task manager and stop updater process. Now power on the printer - chipless firmware is installed now in your printer and maintenance cartridge is recognized by printer! If You have problems - give us screenshots of what You cant do and what Step you cant perform. ''

Hi, I have previously run the program update software (U_FWG535TL_FA99Z9_WF7710). It takes a while to report this ink error, It's run is a new program update that resets the ink IC, but the machine still does not receive the ink.

I have downloaded the new firmware and run it, but the printer still does not receive the toner cartridge. You have to any way that can do you can only guide with. Do I need to buy the Key to re-run the Update firmware John_Admin. https://chiplesssolutions.com/download.shtml Thank you very much.

I have to buy the firmware key to run the FA27HC part again, right? After that, I can replace the new waste toner IC chip, right, John_Admin.

Hi Admin I have an Epson WF 7710 that has run Chipless, but I am now saying Maintenance Box, Although I have rerun Firmware Version - FA24I5 and changed IC chip of waste toner. But still no improvement, there is still report every time it boots up. Thanks Admin

Thanks for your reply. I have 2 of these devices which are new but when I boot up, I report 031006. I think there is a Main error, but I don't know if I have a fix for this case.

Hi Admin. I have a WF-C5790 and WF-7710, both of which are new, but when I boot up it says 031006, check on the software, the printhead fuse error is reported, but I use the nozzle through another machine to run normally. I don't know if it's Mian or what part Admin, ask for your help.

Good day. Did you reupload chipless firmware back to the printer again after update from epson? What is the current version? You can check it in the printer settings or via WIC using `report` button. Yes, my side has downloaded the latest firmware to run already https://chiplesssolutions.com/download.shtml but when entering the acti enter the error code ak, I don't know if my side has encountered this case, there is no way to fix it. thanks .

yes dear it worked previously, but suddenly i've updated to epson's new update. Now I run the Activation Key again, saying that I have even used a new key but failed, thanks to the admin's help. ytW+x1ctJQgBI0p02SevftobVvwCAAAAagAAAGe21UpvFVbjQ48QwHjgFskRKkJhAQAAAPkA AABhAAAA1AAAAO9wGORoVAXLU1A4AAAAAAAAAAAAAAAAAAAAAAAAABSqAQAAAAAAAACj3VRU 5PHnC5Yc93AAAAAAAAAAALhlQAM=

Hello this is my printer C5290 and does not work with the license.exe, it says activation code writing is failed. Although I have followed the instructions of the Admin.