Search the Community
Showing results for tags 'solved'.
Found 63 results
-
I am having some trouble finding the instructions for installing the chipless firmware for Epson XP-15000, so I am guessing at the process from just a few comments I have read. I was able to run the firmware installer (XP15000_FWG150TL_NW20I7_NW99Z9) and upload it to the printer in program update mode (via USB), that seems to work ok. It says "finished". The buttons don't work so I can only unplug it to turn it off. How do I know if it worked? When I go into settings on the printer and view the firmware version, I just see NW2017. It still barks at me about ink levels (I suppose it would until I purchased the license). When I run the firmware installer in normal mode, the screen indicates its updating firmware for a minute or two and then, just goes to the normal epson menu (maintenance, settings, wifi) but the power light flashes steadily (but maybe because one ink cart is out?) The app on the PC will continue to slowly progress all the way to 100% where then I finally get the message "The printer's firmware was not updated." Did it update the first time around and I am just not aware? I didn't want to buy the license until I had some sort of confirmation its installed and will work correctly. Without instructions, I am not clear if I already updated it in 'program update mode' following the small instruction set where you download the firmware prior to buying the license or if thats just testing - or if I am supposed to do that in normal mode? - Some other models look like I am supposed to do it in normal mode, but thats the bit thats not working. Any help would be appreciated. Thank you!
- 6 replies
-
- xp-15000 99%
- xp-15000 firmware
-
(and 1 more)
Tagged with:
-
Installed Firmware, Activated Key, chipless is working but the printer is printing blank pages. 100% sure it has nothing to do with the cartridges so it can only be either the firmware downgrade or the chipless software. How do I fix this? I paid the $60 for the key because I was able to do the firmware but now its useless!
-
I've reset the ink pad counter of my Epson XP-950 with the trial key, reset was successful and printer was restarted successfully and full ink pad counter error disappeared. However since then the printer is just printing blank. I've tried the maintenance tasks as well as a nozzle check and the nozzle check prints as normal and there are no errors either in WIC or on the printer, but print jobs originating either from a computer or printer directly (print status sheet, scan) are printed blank. I've also attempted to leave the printer without power for 30m but it just keeps printing blank. I never had this problem before the ink pad counter full message or the WIC reset. Any suggestions?
-
If You have clogged Epson 4900 - You have to make powerful printhead cleaning by using Initial Ink Charge function. Order and download Epson Pro 4900 cleaning utility: http://www.2manuals.com/product_info.php?products_id=1365 Video Tutorial:
- 2 replies
-
- epson 4900
- unclog
-
(and 1 more)
Tagged with:
-
I've tried several times to down load clipless firmware to my EPSON XP15000 but right at 99% complete I get a message stating firmware download incomplete, or something close to that. I read on the Precision colors website that this is what happens most of the time and when this message is displayed I'm to click "NEXT" and proceed to the next step. However when I do click next the download meters just hangs at 99% indefinitely, is there a way out of this, and or around this dead end, or am I doomed?
-
Hi, I recently bought the Chipless firmware key for the WF-6090 printer. Sucessfully installed and it was all good until the printer throwed the full maintenence box's error. I hard resetted the box but the message was never gone. I had to install the original firmware to get ride of the message but when installing back the chipless solution the counter is always going down for the box and there is no way to get it full even if I switch the box with a totally new one. I already installed twice the firmware. I bought two keys for this and still not able to use the printer properly. It's having this persistent error with the box. It's buggy... @John_Admin are you able to fix it? I really need my printer working with the chipless solution, I bought it because it was a supported model for chipless firmware. I already bought like 5 keys for the WF-5190 and no issues at all with that printer, I only have a huge thank you for your solutions.
-
i need reset XP-970 waste ink counters. Is it supported?
- 1 reply
-
- solved
- reset waste
-
(and 1 more)
Tagged with:
-
Previously I used 3 epson wf-7110 with chipless key. At first the machine ran very well. But after a period of use, the error "close ink cartridge cover". Accompanied by error 0x69, the printer cannot work. I switched to using 2 epson wf-7710 with chipless key. At first the machine ran very well. But after a period of use, the error "close ink cartridge cover". Accompanied by the error "034503", the printer cannot work. I don't know what to do, so I should ask the Admin for help. And I am very grateful.
-
Hi, I did buy a C5710 recently. I already have five of the same printer and no problem converting it to chipless. But with this one I am having problems. I follow the instructions of https://www.2manuals.com/product_info.php?cPath=107&products_id=1940 about uploading firmware I verify because of "If firmware version is CU26I9 - firmware has been uploaded successfully" part with the WIC Utility and everything is good, version number is CU26I9. Now the Activation Key I already did buy and downloaded the Licence.exe app, I press Activate Online, paste the emailed code and the App shows Error writing... I have reinstalled the firmware about three times, verified the instructions everytime. Verified the FW version.
- 5 replies
-
- solved
- activation code writing is failed - 3
-
(and 1 more)
Tagged with:
-
Hi there. Having the exact same issue as: https://forum.2manuals.com/index.php?/topic/80626-error-when-trying-to-activate-wrong-id-readed-from-the-printer/ I notice you provided new firmware, different than the one on your site. Do you have a new firmware zip for WF4720? Thank you. Just bought my key and emailed you guys also.
- 6 replies
-
- wf-4720 update mode
- wrong id readed
-
(and 3 more)
Tagged with:
-
The problem I have is that after a firmware update, my printer no longer recognized the offbrand cartridge . I installed the firmware and that seemed to work fine. If I buy this activation key, will that solve the issue? As in, will I be able to use the cartridges again? Or will I have to buy refillable cartridges? I have searched and don't see any for the wf-4730 . Any help would be appreciated. Thank you
- 8 replies
-
- wrong id
- wf-4730 - wrong id
-
(and 1 more)
Tagged with:
-
Would activation keys for wf-3720 work for wf-3730?
- 9 replies
-
- wf-3730 chipless
- wf-3730 firmware
-
(and 2 more)
Tagged with:
-
my epson printer L1455 main board got spoilt, then i bought another one. the one i bought is recognized as Et 16500 series, but it starts in inspection mode, what can i do for the printer to start normally to start working again
- 4 replies
-
- printer inspection mode
- epson eeprom
-
(and 2 more)
Tagged with:
-
Hello I reset my Epson Ecotank ET-2750 with the trial code as I had the service message due to ink pad being full. The reset worked fine, I have two counters now showing 80%. When I read the status it states "Waist ink pad counter overflow error" and the printer itself is not operational as before. See screenshot below: I used WIC Reset Utility v5.60 Feb 24 2021. Firmware version of the printer: LW20L1 Do you know how to overcome this error?
-
Hi, my epson wf-7211 stuck in recovery mode after failed firmware downgrade, i have searching the right firmware but all doesnt work, please help and is there a chipless solution for this printer?thank you..
- 21 replies
-
- wf-7211 chipless
- solved
-
(and 1 more)
Tagged with:
-
Hi there. I can’t figure out how to revert back to the ORIGINAL Epson version FA20I4 firmware. I ran the Epson software updater but it doesn’t trigger an update. Do I need to use WIC to rollback to an older version first ? And do I really need to purchase another key to do this ? i installed the chipless update using your EPFWUPD utility and License.exe - not WIC. I really need to do this soon because I have to ship back the printer to Epson for an exchange !
-
I have an Epson WF7720 and I have been using 3rd party sublimation ink. Once I took my cartridges out for refilling the printer no longer recognizes the inks. My printer firmware was set automatically update software. Prior to me refiling the ink I had no problems with the printer. The question I have is, "Will your keys work so I can further access my printing?" I have attached a picture of the error that I'm receiving. Please help!! fwdprinterissues.zip
- 9 replies
-
- wf-7720
- restore chipless
-
(and 2 more)
Tagged with:
-
I've been trying to contact suport since yesterday and no answers or help at all untill now. I have done it before, so I'm sure it's not on my end.
-
I need inizialize waste ink absorber of paper plane when print with no margin (NO MAIN WASTE INK TANK). The adjustment program on 2manuals can do it?Thanks.
-
Hey, I just bought a 'renewed' XP-15000 and a CISS set on ebay, but I can't seem to figure out how to downgrade the firwmare, and the chipless install failed as well. Is this possible? Firmware NW07K7 07/07/2020
-
Hi, My firmware appears to have completed successfully, but it appears that duplexing feature seems to be impacted in OSX. The dulplex option is now greyed out in "layout" print dialogue (pictured) where it was not before the update. There is another duplex option in "printer features," (pictured) and it will print both sides, but it only will do short edge binding wether long or short edge binding option is selected. Can someone help fix this, most of my print jobs will require long leaf duplexing and I don't see any way to do this. Thanks, Charles