Jump to content
Printer Reset Forum

Blackhawk

Members
  • Content Count

    5
  • Joined

  • Last visited

Everything posted by Blackhawk

  1. That worked perfectly, now at 100% on all inks, thanks!
  2. Can I please just get my activation code? I could probably have figured out the firmware myself by now if you'd sent me the code when you replied to this thread before, I hope I don't have to wait another 24 hours for somebody to check the forum.
  3. As I said in the message above, the current firmware is FA20I4 20/04/2018 and nothing I've done so far has changed that. Also as I said before I've paid but did not receive a license key in the email I got, the space was blank.
  4. Further to this I don't think I've had much luck with changing the firmware. If I download the firmware from here: https://www.2manuals.com/product_info.php?cPath=107&products_id=1851 And try to install with the printer turned on and in a normal state then it takes a long time to update, gets to 99% and then fails. If I check with wicreset the firmware version has not changed. If I try to install with the printer in the 'firmware update' mode (by holding down the four buttons) then the firmware update happens much faster, says that it completed and the power light on the printer starts flashing. If I turn the printer off at that point and turn it back on again it starts OK but when I check the firmware version with wicreset the version has not changed. Any tips? Even when I eventually do get my license key at this point I'm not sure if it will even work if the firmware version on the printer never seems to change (currently FA20I4 20/04/2018)
  5. In my confirmation email I did not get an activation key, the field is just blank.
×
×
  • Create New...