Jump to content
Printer Reset Forum

John_Admin

Administrators
  • Content Count

    848
  • Joined

  • Last visited

  • Days Won

    20

Posts posted by John_Admin


  1. Epson
    WF-2630, WF-2631
    WF-2650, WF-2651
    WF-2750, WF-2752
    WF-2760, W-2761
    WF-4630


    Power OFF the printer and in 20 seconds  press and hold such buttons::
    WF-4630 chipless firmware

    STOP + 1 + HOME + POWER – wait until on printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If text is in red color - that is wrong mode. Try once more time.

    Next Step - Upload Firmware to printer.
    Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

    When Firmware Update is Finished - confirm that new Firmware Version is displayed on the LCD.
    Press on the 0 – printer will turn OFF.

    Step 5. Switch ON the printer. Printer will be in regular condition.

    Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Go back to main Guide to use Activation Key


  2. Epson WF-4720, WF-4730, WF-4733, WF-4734, PX-M780F  

    Press and hold:
     WF-4720, WF-4730, WF-4733, WF-4734, PX-M780F chipless firmware


    RIGHT UPPER DISPLAY CORNER + POWER – wait about 3 sec until Blue Power Led is ON - then release all buttons. On printer monitor you wil see WHITE text - Firmware Update Mode. If text is in red color - that is wrong mode. It means You hold too long. Try once more time.

    Next Step - Upload Firmware to printer.
    Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 
    When Firmware Update is complete confirm that new Firmware Version is displayed on the LCD.
    Press on the CENTER of TOUCH SCREEN – printer will turn OFF.
    Switch ON the printer. Printer will be in regular condition.

    Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Go back to main Guide to use Activation Key


  3. Epson
    WF-2860, WF-2861, WF-2865
    WF-3720, WF-3721, WF-3723, WF-3725, WF-3730, WF-3733, PX-M680F 

    Press and hold:
    WF-3720, WF-3721, WF-3723, WF-3725, WF-3730, WF-3733, PX-M680F chipless firmware


    RIGHT UPPER DISPLAY CORNER + POWER – wait 20 sec or until power LED is ON then release all buttons. You will see text on the printer's LCD monitor in WHITE color - Firmware Update Mode.
    If text is in red color - that is wrong mode. Try one more time.

    If this way doesn"t work - You have to use other.
    Please go here to see other ways to put printer in Program Update Mode - How to put WF3720 in Program Update Mode

    Next Step - Upload Firmware to printer.
    Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 
    When Firmware Update is complete confirm that new Firmware Version is displayed on the LCD.
    Press on the CENTER of TOUCH SCREEN – printer will turn OFF.
    Switch ON the printer. Printer will be in regular condition.

    Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Go back to main Guide to use Activation Key


  4. Upload firmware to  printer in normal mode  - dont put printer in Program Update mode.
    The uploading process will stuck at 70-80% -  it is ok!
    Open task manager and stop updater process.
    Printer will blink for about 5-15 minutes - then will power OFF.

    Now power on the printer - chipless firmware is installed now in your printer!

    Use License and Activation Key

     

  5. Epson
    WF-7710, WF-7711, WF-7715, WF-7720, WF-7721, PX-M5080F, PX-M5081F


     

    Power OFF the printer and in 20 seconds  press and hold such buttons::
    wf-7710 chipless firmware

    4 + 7 + JOB/STATUS + POWER – wait 3-5 sec until on printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If text is in red color - that is wrong mode. Try once more time.

    Next Step - Upload Firmware to printer.
    Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

    When Firmware Update is complete confirm that new Firmware Version is displayed on the LCD.
    Press on the 0 – printer will turn OFF.

    Step 5. Switch ON the printer. Printer will be in regular condition.

    Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Go back to main Guide to use Activation Key


  6. Epson
    XP-340, XP-341
    XP-342 XP-343 XP-345
    XP-352, XP-355
    XP-430, XP-431, XP-434
    XP-440, XP-441
    XP-3100, XP-3105, EW-452A
    XP-4100 XP-4101 XP-4105
    WF-7210, WF-7211 WF-7215, PX-S5080


     

    Press and hold:
    XP-340, XP-341 chipless firmware

    STOP + LEFT ARROW + DOWN ARROW + POWER – wait until all LEDs except Power LED is ON - then Release all buttons. 
    That means printer is in Firmware Update mode.
    If indication differs - that is wrong mode. Try once more time.

    Next Step - Upload Firmware to printer.
    Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

    After Firmware Update is finished - all LEDs will blink simultaneously – printer will go OFF.
    Press STOP button - printer will  turn OFF.

    Switch ON the printer. Printer will be in regular condition.

    Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Go back to main Guide to use Activation Key


  7. Epson
    XP-240, XP-241, PX-049A  
    XP-243, XP-245, XP-247
    XP-255, XP-257
    XP-2100, XP-2101, XP-2105, EW-052A

     

    Press and hold:
    xXP-240, XP-241, PX-049A chipless firmware

    STOP + COLOR + WIFi + POWER – wait until all LEDs except Power LED is ON - then Release all buttons. 
    That means printer is in Firmware Update mode.
    If indication differs - that is wrong mode. Try once more time.

    Next Step - Upload Firmware to printer.
    Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

    After Firmware Update is finished - all LEDs will blink simultaneously – printer will go OFF.
    Press STOP button - printer will  turn OFF.

    Switch ON the printer. Printer will be in regular condition.

    Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Go back to main Guide to use Activation Key


  8. Epson XP-211, XP-212, XP-213, XP-214, XP-216, PX-046A
    XP-230, XP-231, PX-048A  

    Press and hold:
    XP-211, XP-212, XP-213, XP-214, XP-216, PX-046A chipless firmware

    STOP + COLOR + WIFi + POWER – wait until all LEDs except Power LED is ON - then Release all buttons. 
    That means printer is in Firmware Update mode.
    If indication differs - that is wrong mode. Try once more time.

    Next Step - Upload Firmware to printer.
    Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

    After Firmware Update is finished - all LEDs will blink simultaneously – printer will go OFF.
    Press STOP button - printer will  turn OFF.

    Switch ON the printer. Printer will be in regular condition.

    Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
    Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

    Go back to main Guide to use Activation Key

×
×
  • Create New...