I paid for the reset counter through a reseller by M-pesa but no response so far.

[I paid for the reset counter through a reseller by M-pesa but no response so far.]

Please contact person whom you have paid directly

[Canon MG2950]

https://www.2manuals.com/product_info.php?cPath=99&products_id=1860

[How to put printers in Firmware Mode]

Epson
WF-7710, WF-7711, WF-7715, WF-7720, WF-7721, PX-M5080F, PX-M5081F

 

Power OFF the printer and in 20 seconds  press and hold such buttons::


4 + 7 + JOB/STATUS + POWER – wait 3-5 sec until on printer monitor you will see WHITE text - Firmware Update Mode – then Release all buttons. If text is in red color - that is wrong mode. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

When Firmware Update is complete confirm that new Firmware Version is displayed on the LCD.
Press on the 0 – printer will turn OFF.

Step 5. Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

[Request - Epson Stylus Photo TX730WD]

TX730 is old version and will be NOT supported for chipless
You can buy Auto Reset chips in China

[How to put printers in Firmware Mode]

Epson
XP-340, XP-341
XP-342 XP-343 XP-345
XP-352, XP-355
XP-430, XP-431, XP-434
XP-440, XP-441
XP-3100, XP-3105, EW-452A
XP-4100 XP-4101 XP-4105
WF-7210, WF-7211 WF-7215, PX-S5080

 

Press and hold:


STOP + LEFT ARROW + DOWN ARROW + POWER – wait until all LEDs except Power LED is ON - then Release all buttons. 
That means printer is in Firmware Update mode.
If indication differs - that is wrong mode. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

After Firmware Update is finished - all LEDs will blink simultaneously – printer will go OFF.
Press STOP button - printer will  turn OFF.

Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

[How to put printers in Firmware Mode]

Epson
XP-240, XP-241, PX-049A  
XP-243, XP-245, XP-247
XP-255, XP-257
XP-2100, XP-2101, XP-2105, EW-052A
 

Press and hold:


STOP + COLOR + WIFi + POWER – wait until all LEDs except Power LED is ON - then Release all buttons. 
That means printer is in Firmware Update mode.
If indication differs - that is wrong mode. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

After Firmware Update is finished - all LEDs will blink simultaneously – printer will go OFF.
Press STOP button - printer will  turn OFF.

Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

[How to put printers in Firmware Mode]

Epson XP-211, XP-212, XP-213, XP-214, XP-216, PX-046A
XP-230, XP-231, PX-048A  

Press and hold:


STOP + COLOR + WIFi + POWER – wait until all LEDs except Power LED is ON - then Release all buttons. 
That means printer is in Firmware Update mode.
If indication differs - that is wrong mode. Try once more time.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

After Firmware Update is finished - all LEDs will blink simultaneously – printer will go OFF.
Press STOP button - printer will  turn OFF.

Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

[How to put printers in Firmware Mode]

Epson Sure Color SC-P400, SC-P405, SC-P407, SC-P408, PX7V  

Press and hold:


ROLL + INK + PAPER/CANCEL + POWER – wait 3-5 sec until Ink, Paper and Power LEDs are ON – then Release all buttons - printer is in the firmware update mode now.

Next Step - Upload Firmware to printer.
Run EPFWUPD.EXE file and follow all steps until Firmware will upload in printer. 

When firmware update is completed Power LED will start to blink.
Press POWER button – printer will turn OFF.

Switch ON the printer. Printer will be in regular condition.

Note 1: If upload process stuck at 70-80% - You have to unplug printers power cable for 1 min and switch printer ON.
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Note 2: If printer doesn't accept firmware - try to make it in Recovery Mode -  read how  HERE
Confirm right firmware version is now in Your printer. Read how to check current firmware version here.

Go back to main Guide to use Activation Key

[XP-211 - Could not execute one of the update commands - not downgrade]

azaza

Upload firmware in normal mode
dont put printer in firmware mode

[NoInks Updater for making chipless printers WF-C5xxx]

Matias37, 

1. WF-C5890  - is not supported model.
2. For XP-241 chipless firmware - please follow Step by Step Guide - 
https://www.2manuals.com/product_info.php?cPath=107&products_id=1834

[Activator did not generated the Recovery File after printer activated - Activator Error C5290]

If printer will update - 
Just repeat all procedure with updater and key
 

[Unsuccessful downgrade Epson XP-430]

How can I help you if you dont give me any information - no error text message, no any screenshots etc... only - doesn't downgrade.
How can I help you??
I gave you link to Step by Step Guide - have you followed it???
At what step you have problem??
Have you up[loaded firmware to your printer??
What is your CURRENT firmware version in your printer now???
Have you used License.exe application??
Have you input Activation Key successfully??
I dont know this onformation
Please provide us step by step screenshots - then I will be able to help you.

["Please Update Our Firmware"]

Printer doesnt know its location!!

[WF-3640 WIC Firmware Downgrade Not Working]

What exactly is your problem?? Give us screenshots please.

[Unsuccessful downgrade Epson XP-430]

Follow Step by Step Guide to male XP-430 chipless - https://www.2manuals.com/product_info.php?cPath=107&products_id=1835

[Reset to waste ink for Canon MG 6850]

Use Service Tool - https://www.2manuals.com/product_info.php?cPath=99&products_id=1860

[Internet Connection Is Lost...]

Had server issue - now fixed - try now

[Xp 241(2 different printers) chipless Shut down]

No problem with firmware.
I think you have hardware problem.
Check voltage in your power supply. No one customer had such problem.

[paquete de solucion sin chip epson wf-c5710]

You can buy here - https://www.2manuals.com/product_info.php?cPath=107&products_id=1904

[paquete de solucion sin chip epson wf-c5710]

Have you already paid for key???

 

[Epson XP-3100, XP-4100 Free Waste Ink Platen Pad Reset]

When Your Printer Epson XP-3100, XP-4100 Series - stops and require service - that means waste Ink Counters may be overflowed.
If Overflowed MAIN Waste Ink Counter - You have to reset it by Hardware Chip Resetter or replace Chip on Maintenance Box.
If Overflowed PLATEN PAD Waste Ink counter - You can reset it FREE in few seconds by WIC Reset Utility. 

 

https://youtu.be/fGCJ-j5VKWs

[ChiplessSolutions - WF-4740]

You can buy new printer which is supported by chipless firmware

[ChiplessSolutions - WF-4740]

yes

[WF-7710 - updating failed]

Updated

[Epson Stylus NX420]

Hardware problem.