FJP 0 Report post Posted October 12, 2019 Firmware update successful. Purchased Key. Try to License get: Wrong ID Readed from the printer. See photos. Tried firmware flush based on your recommended link here but still a no go. Share this post Link to post Share on other sites
wic.support 30 Report post Posted October 14, 2019 Can you check current firmware version of the printer using WICReset and post here. Share this post Link to post Share on other sites
FJP 0 Report post Posted October 15, 2019 used CL2112 from link you provided but shows CL27J9 on printer Share this post Link to post Share on other sites
John_Admin 382 Report post Posted October 16, 2019 We have updated firmware version now. Please download new firmware version here - https://chiplesssolutions.com/download/chipless/WF3720_FWF469TL_CL30J5_CL99Z9.zip Upload firmware to printer in normal mode - dont put printer in Program Update mode. The uploading process will stuck at 70-80% - it is ok! Open task manager and stop updater process. Printer will blink for about 5-15 minutes - then will power OFF. Now power on the printer - chipless firmware is installed now in your printer! Please reply about results. Share this post Link to post Share on other sites
FJP 0 Report post Posted October 17, 2019 That worked!! Thanks John Share this post Link to post Share on other sites
xemoterp 0 Report post Posted February 9, 2020 I am having a similar problem with an Epson WF-3730. Attached is the screenshot from the WIC tool. License tool does reports printer as unsupported. Share this post Link to post Share on other sites
xemoterp 0 Report post Posted February 9, 2020 This is the result ... Share this post Link to post Share on other sites
wic.support 30 Report post Posted February 9, 2020 @xemoterp, please, try this: www.chiplesssolutions.com/download/updates/license-09-02-2020.zip and write about the results in this topic. Share this post Link to post Share on other sites
xemoterp 0 Report post Posted February 9, 2020 The above license file fixed my issue completely. I am now able to use my Epson WF-3730 with an ink cartridge that was originally not accepted by the printer (a brand new 3rd party one that had a chip that was incompatible with the printer). The activation procedure was exactly as described (easy) with this new license file application! Great customer service and a fantastic solution to using 3rd party inks with the Epson WF-3730! Share this post Link to post Share on other sites
Tria 0 Report post Posted June 7, 2020 Help memy Epson WF3720 error 031008 appears.when using a firmware update from Epson back to normalwhen using firmware chipless error it returns again Share this post Link to post Share on other sites
wic.support 30 Report post Posted June 7, 2020 Good day. 031008 error or 0x7920 in hex is: VBS overvoltage error (VBS is Bulk-Source Voltage). Possible causes: Head FFC failure. Failure of the head. Main Board Failure. Unfortunately, I do not have specific solution. Problem is definitely with the printhead, but what exactly causes this is not clear. Maybe new firmware version is just better at handling printhead with voltage issues or at least less sensitive to this kind of problems. Share this post Link to post Share on other sites
Tria 0 Report post Posted June 7, 2020 This happens when I use to print, suddenly stops in the middle and papper jump.How do I return to my Chipless firmware?I tried it but the printer still reads cartridge Share this post Link to post Share on other sites
wic.support 30 Report post Posted June 7, 2020 You can restore chipless firmware by using the same key that you used to activate it first time. Share this post Link to post Share on other sites
Tria 0 Report post Posted June 7, 2020 and I have tried and succeeded, but error 031008 reappeared Share this post Link to post Share on other sites
