Jump to content
Printer Reset Forum


  • Content Count

  • Joined

  • Last visited

Everything posted by tdudash

  1. They have a Windows 7 PC, it automatically updated the firmware when they started the PC, I wasn't there then, we'll need to remove the Epson file from their PC first. Thanks!
  2. After moving the printer, will I need to update the firmware at the new location?
  3. The 3rd time was a charm, it works now. When I move the printer to a new location, will there an issue again? Will I need to run your firmware update at their location?
  4. I upgraded the Firmware on a WF-5710 successfully. I gave the printer to a non-profit and when trying to install the printer at their location, It wouldn't recognize the ink cartridges. I tried to update the firmware at their location, the printer is on a network and wasn't recognized. When I brought the printer home to attempt another Chipless Conversion and I now receive the message to "Please Update Our Firmware", I figured there may be a newer version, I downloaded the firmware for the WF-C5710 again and attempted to upgrade and still receive the "please update our firmware" message. Any ideas?
  5. I get a "Internet Connection is lost, try again later", I keep trying without success. What next?
  6. I have the same issue, "no internet connection, try again later" I keep trying without success? Are you having issues on your end?
  7. Having problems installing Chipless on Epson WF-C5710, tried installing in Firmware Update mode, that failed, tried again in Normal mode, failed again. Tried both methods again and failed. Any ideas?

  8. I used the download file from ChiplessSolutions.com for WF-C5710, PX-M884F (not sure if the PX-M884F applied to my model) there wasn't a Manual. I tried to update in normal mode and after pressing 4 + 7 + Job/Status + Power, attached are 3 photos. I got the Firmware download that was successful, but when I ran NoInks and entered the Key, it said "Failed". I bought the Key before I had successfully updated the Firmware.
  9. Hi John, I downloaded the Firmware file, it was different from the file used previously. Then I ran the NoInks Updater and it said "Failed". Any ideas?
  10. Thanks for your reply. I downloaded the Updater File. It ran as described, however I couldn't find the License.exe to enter the Key.
  11. I tried to update again, the progress reaches 100%, the Information Windows says to wait until the printer to turn off automatically, the printer starts blinking the power button for 5-10 seconds, then everything starts blinking, error & data buttons also blink. The display on the printer says "FINISHED", with 3 ROM files listed below.
  12. OK, I use a Mac mostly, I'll start my PC laptop and give it another try and will send a Report if it fails again.
  13. I updated in service mode, pressed 3 keys plus power, it restarted in update mode, the update said "successful', then several lights on the display blinked, pressing the screen didn't help. Had to pull the power cord to stop the blinking. Don't know how to check the current version of the firmware.
  14. I've updated 3 Epson printers to Chipless successfully, yesterday I tried a C5710 and it said the results were successful, but the printer had all of the lights on the touch screen flashing. Had to pull the power cord to turn it off. Any ideas?
  15. I have a Chipless Epson C5210 printer, after approx. 25,000 prints the cyan was printing lighter as I used the printer. I am recently retired from the commercial printing industry and have watched press operators tweek their ink on a press by adding a little black or other color. I added some black to the cyan cartridge and BOOM, it fixed the problem. The prints are darker and look like they did before the problem.
  16. I had this problem, the printer had 47,000 impressions, the Chipless seems to prevent the Ink Tank Full message. The Ink Box was overflowing which tripped the Ink Sensor, ink was literally dripping out of the printer.
  17. Oops, I found the download link, ran the update successfully, bought a Key, when I downloaded and ran the NoInks link and entered the Key, nothing happened. What am I doing wrong? The Key had Zeros that I thought were "O"s. Keys should only contain numerals 1-9, no zeros.
  18. I clicked on the C5290 download and it takes me to a blank page for the zip file. Update, I downloaded the file, it was successful, I bought a key, but after downloading and running the NoInk file, nothing happened when I entered the Key. Another update, SUCCESSFUL! I entered the key again and changed the Ohs to Zeros. Success!
  19. Will instructions for the C5710 printer be available soon?
  20. when I got to the window and clicked "Activate Online" I received a "Reading failed - 1" message.
  21. So if the update says that it failed, continue to run the Licence.exe and enter the Activation Key? And it will work? Will it work if I start out with a bricked screen, like the attached?
  22. I tried the updated file from Dec. 17, it didn't work, ended up with the same screen as the photo posted above. Any ideas on how to produce chipless after Epson's firmware update on Oct. 11, 2019?
  23. I tried the download on my WF-C5210, the process didn't work, is there any other updates for my model? My printer now looks like the attached. Is there any new solutions?
  • Create New...