Search the Community
Showing results for tags 'solved'.
Found 64 results
-
my epson printer L1455 main board got spoilt, then i bought another one. the one i bought is recognized as Et 16500 series, but it starts in inspection mode, what can i do for the printer to start normally to start working again -
Hello I reset my Epson Ecotank ET-2750 with the trial code as I had the service message due to ink pad being full. The reset worked fine, I have two counters now showing 80%. When I read the status it states "Waist ink pad counter overflow error" and the printer itself is not operational as before. See screenshot below: I used WIC Reset Utility v5.60 Feb 24 2021. Firmware version of the printer: LW20L1 Do you know how to overcome this error?
-
As stated, I have tried to to change Firmware, But every single time it does not load up to the printer. -
Hi there. I can’t figure out how to revert back to the ORIGINAL Epson version FA20I4 firmware. I ran the Epson software updater but it doesn’t trigger an update. Do I need to use WIC to rollback to an older version first ? And do I really need to purchase another key to do this ? i installed the chipless update using your EPFWUPD utility and License.exe - not WIC. I really need to do this soon because I have to ship back the printer to Epson for an exchange ! -
I have an Epson WF7720 and I have been using 3rd party sublimation ink. Once I took my cartridges out for refilling the printer no longer recognizes the inks. My printer firmware was set automatically update software. Prior to me refiling the ink I had no problems with the printer. The question I have is, "Will your keys work so I can further access my printing?" I have attached a picture of the error that I'm receiving. Please help!! fwdprinterissues.zip -
Hi Admin I have an Epson WF 7710 that has run Chipless, but I am now saying Maintenance Box, Although I have rerun Firmware Version - FA24I5 and changed IC chip of waste toner. But still no improvement, there is still report every time it boots up. Thanks Admin -
Epson 15000. At the middle of the updating, the utility said something like "firmware update confirmed" but at the end it said error, update did not complete and that I should retry. I did that with the same result. If it is actually updated per the message should I buy and try a chipless key? I don't want to do that if it can't work and I will have wasted my money. Printer screen now says "Cannot recognize ink cartridge". That was the problem at the beginning after the printer was updated by Epson. -
License.exe is reporting communication failed error 10089. Printer firmware was updated successfully. Firmware is FA24I5 Bought the key online but not being able to activate using license.exe having this same issue happening with two different printers. order numbers: #20409987 and #20410101 -
Hi, I did buy a C5710 recently. I already have five of the same printer and no problem converting it to chipless. But with this one I am having problems. I follow the instructions of https://www.2manuals.com/product_info.php?cPath=107&products_id=1940 about uploading firmware I verify because of "If firmware version is CU26I9 - firmware has been uploaded successfully" part with the WIC Utility and everything is good, version number is CU26I9. Now the Activation Key I already did buy and downloaded the Licence.exe app, I press Activate Online, paste the emailed code and the App shows Error writing... I have reinstalled the firmware about three times, verified the instructions everytime. Verified the FW version.
-
Hey, I just bought a 'renewed' XP-15000 and a CISS set on ebay, but I can't seem to figure out how to downgrade the firwmare, and the chipless install failed as well. Is this possible? Firmware NW07K7 07/07/2020
-
Hi, My firmware appears to have completed successfully, but it appears that duplexing feature seems to be impacted in OSX. The dulplex option is now greyed out in "layout" print dialogue (pictured) where it was not before the update. There is another duplex option in "printer features," (pictured) and it will print both sides, but it only will do short edge binding wether long or short edge binding option is selected. Can someone help fix this, most of my print jobs will require long leaf duplexing and I don't see any way to do this. Thanks, Charles
-
I need inizialize waste ink absorber of paper plane when print with no margin (NO MAIN WASTE INK TANK). The adjustment program on 2manuals can do it?Thanks. -
Due to EPSON firmware update that returned the printer to chipped. Chipless firmware was updated from the web site and loaded back on EPSON Workforce Pro WF-3720 and checked,however when doing recovery.the printer remained chipped as the ink tanks showed their remaining amounts and the ciss when installed came up as not recognized, please help ,best wishes -
I received a 10092 error when trying to activate the key for the firmware for my SC-P800 printer. My order # is 193762. I also sent a message with your support system. I tried different USB ports and disabled the Windows firewall with no change. Can you please help me? Thank you, John
-
License.exe will not see the WF-7710. Upon investigation I believe this is because the firmware installation cannot complete due to the error condition of the printer not recognizing the yellow ink cartridge, and that is why I want to install the firmware. I have tried installing a new Epson yellow cartridge and the printer will not recognize this cartridge either. So I am stuck in the situation of an error I can't clear and that error prevents the firmware installation from completing. If the firmware would install, the cartridge recognition would be disabled and there would be no error, but I can't get there from where I am now. When I check the firmware on the printer, it does report the new firmware FA24I5, indicating it was installed, but License.exe does not see the printer. Is there a way to disable the error condition caused by the failure to recognize the yellow cartridge? -
I have a XP241, I have adquired the unlock lincences, but it doen´t works. When I try to Activate Online, I receive a connection error, to verify usb port, firewall and internet connection. But its all ok. The firmware was already updated to the version MF07I3. I have tried first using the printer in setup mode, so I have found an answer regarding XP241, where you indicate to do it on normal mode, but it doesn´t works anyway. I have deleted all of other printers from my computer, including the XP241 drivers and reinstalled the 241 drivers. Tried to send the MF07I3 firmware by normal mode and config mode, changed the usb port, changed the usb cable...
-
The 2 orders #191283 processed in the link below went well,However, order #191306 has 10092 error like the attached capture.The period of use is use before september 30.
-
Installed Firmware, Activated Key, chipless is working but the printer is printing blank pages. 100% sure it has nothing to do with the cartridges so it can only be either the firmware downgrade or the chipless software. How do I fix this? I paid the $60 for the key because I was able to do the firmware but now its useless! -
Previously I used 3 epson wf-7110 with chipless key. At first the machine ran very well. But after a period of use, the error "close ink cartridge cover". Accompanied by error 0x69, the printer cannot work. I switched to using 2 epson wf-7710 with chipless key. At first the machine ran very well. But after a period of use, the error "close ink cartridge cover". Accompanied by the error "034503", the printer cannot work. I don't know what to do, so I should ask the Admin for help. And I am very grateful. -
Activation code error, please, check, I get that error and I just bought the key for this is the second printer that I am returning it without a chip but you cannot enter the key in the previous one and it did not give me problems, I need an urgent solution Ver foto. -
Want to ask first before changing the firmware - Just acquired a WF-7720 (using 27 cartridge) through grey import but at where I live only WF-7721 (using T188 cartridge) is available... Will be using genuine cartridge as I am really after the pigment ink. After making chipless is it possible to use the T188 cartridge directly? Or is it possible to flash the WF-7721 firmware? -
when I tried to Activate online button I got this error "Reading failed -1" XP 15000
-
I have a Epson xp-452 with MM1108 Epson version firmware and try to install this chipless firmware from: https://www.chiplesssolutions.com/download/chipless/XP452_FWH316TL_MM10I8_MM99Z9.zip Put the printer in Update Program Mode and then update the firmware. The printer receives the firmware and shows progress 0/100 to 100/100 Compares, Erase and Writes ROM data. At final shows: Finished! Checsum B0BD ROM Ver. 20.08.MM1018 Checksum2 B6D2 Rom Ver2. MM1018 In computer all is correct and shows finalized too. I turn off the printer and when turn on it again and see the same Epson firmware with no update. Nothing changed- What can I do to indeed update your firmware to the printer? -
Hello, can you help me, printer does not load says reading failed 1
-
Installed the programed firmware from chipless solutions and printing quality dropped to almost unreadable. Very little ink on the page, like a faded page. Activated the firmware and still no change. Can't see any obvious printer settings being wrong. Any solution or hints would be much appreciated. Cheers
